Gas Gun 10000 PSI

Fluid Level Gun 10.000 PSI


Key component of any acoustic fluid level instrument such as the sonoecho™ is a pressure pulse generator.

The Leutert pressure pulse gun consists of a volume chamber that may be isolated from the well by a quick opening plunger valve once the gas gun is connected to the casing or tubing flow line.

Gas from the wellbore may be quickly vented into the volume chamber (implosion) causing a negative pressure pulse traveling down the well and and echoes from the fluid level. An external gas source is not needed but a wellhead pressure of at least 50 to 100 psi is required.

A dual disc pressure sensitive microphone incorporated into the gas gun will sense this echo and converts it into a 4 to 20 mA output signal.

The hardware of all sonoecho™ fluid level guns is intrinsically safe and ATEX certified. A must when working in hazardous area like the well head. Learn more about ATEX and intrinsically safety.


  • Single shot fluid level gas gun with an elevated pressure rating of 10,000 psi
  • Operates in implosion mode
  • No limitation of fluid levels to be shot as no battery is required for transmission
  • Easy accessible microphone allows on site cleaning after every fluid shot for long life of equipment
  • Free rotating pressure gauge allows observation of casing or tubing pressure from 360° angle
  • NACE approved for use in hazardous areas


Pressure rating: 0 to 10,000 psi (0 to 690 bar)
Thread connection:

1/2" NPT male

Operating temperature: -4 to 140 °F (-20 to 60 °C)
Weight: 10.1 lbs (4.6 kg)
Certification: ATEX (intrindsically safe) & NACE approved